DTF Station Hot Peel Instructions

Instructions:

1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
2. Apply hot melt powder evenly and remove the excess powder
3. Hovering to bake the hot melt powder (340°F, 5min)
4. Transfer the image by heat press at 320°F for 15sec with medium pressure
5. After the first press,
    Option 1: Wait for 5~ 7 seconds and remove the film gently
    Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
6. Heat press again at 320°F 5-10sec with medium pressure to enhance softer hand feel