- Help Center
- Dye Sublimation Printer
- Epson SureColor F170
-
Employee Access
-
Announcement
-
Support
-
Direct to Garment (DTG) Printer
-
Direct to Film (DTF) Printers
-
Solvent Printers
-
Dye Sublimation Printer
-
Heat Transfer Printer
-
Signage Printer
-
UV Printer
-
Pad Printing Printer
-
Screen Printing Printer
-
Heat Press
-
Pretreating
-
Dryer
-
Cutter
-
Software
-
Ink
-
Supply
-
Media
-
Heat Transfer Vinyl
-
Garment Folding
-
Direct to Film (DTF) or DTG Transfer
-
Uncategorized
Epson SureColor F170 Dye Sublimation Printer Design Color Settings
When using the Epson SureColor F170 Dye Sublimation Printer, follow the steps below to assure the colors of your design transfer properly onto your garment.
Follow the steps below before printing your artwork:
1. Please make sure the file color setting is RGB
2. Then go to View >Proof set up > Custom
3. Select sRGB IEC61966-2.1 and Relative Colorimetric and check the Black Pt Compensation
4. Save the settings and click ok (you can try other profile too)
5. Click Print and check the settings
6. then click "Print Setting"
7. Check the settings on the paper type and set it Textile ( Note the the printer profile and the paper type should be always same)
Click ok then Print