DTF Station Hot Peel Instructions


  1. Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
  2. Apply hot melt powder evenly and remove the excess powder
  3. Hovering to bake the hot melt powder (340°F, 5min)
  4. Transfer the image by heat press at 320°F for 15sec with medium pressure
  5. After the first press,
     Option 1: Wait for 5~ 7 seconds and remove the film gently
     Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently
  6. Heat press again at 320°F 5-10sec with medium pressure to enhance softer hand feel